Toyota

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652846

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 4

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1: Attaching piece. Part 2: Proclip Car Bracket Mount faceplate.



Enlarge image

1. Press the enclosed gap openers into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap between the gap openers. Push Part 1 away from the steering wheel, so the angled edge of Part 1 hooks under/behind the console frame and the adhesive sticks to the dashboard.



Enlarge image

2. Pull out the gap openers. Press on the frame surrounding the control panel so it snaps back into place.




Enlarge image

3. Press a screw driver through the predrilled holes on Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto part 1 so the holes match up. Screw the enclosed holes into the holes in Part 2.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Avensis for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652845

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 5

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1: Attaching piece. Part 2: Proclip Car Bracket Mount faceplate.



Enlarge image

1. Press the enclosed gap opener into the gap between the dashboard and the frame surrounding the control panel. Peel off the cover of the adhesive tape on Part 1. Press the angled edge of Part 1 into the gap below the gap opener. Push Part 1 away from the steering wheel, so the angled edge of Part 1 hooks under/behind the console frame and the adhesive sticks to the dashboard.



Enlarge image

2. Pull out the gap opener. Press on the frame surrounding the control panel so it snaps back into place.




Enlarge image

3. Press a screw driver through the predrilled holes on Part 2 to open them up. Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto part 1 so the holes match up. Screw the enclosed holes into the holes in Part 2.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Avensis for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652535

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Press upper part of the Proclip Car Bracket Mount into the gap between the panel frame and the padded dashboard at pos. 1. Press until you hear/feel it snaps into place.



Enlarge image

2. Press the thin end of the enclosed gap opener into the gap at pos. x to widen the gap between the air vent panel and the surrounding panel frame. Then press the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener.




Enlarge image

3. Slide the Proclip Car Bracket Mount towards the steering wheel into pos. 2. Pull out the gap opener.







Toyota Avensis for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 632580

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 7

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Avensis's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Avensis. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Clean the surface at pos.2. with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the lower part of the Proclip Car Bracket Mount, with angle, under the console edge by the floor at pos.1.




Enlarge image

3. Hook the upper part of the Proclip Car Bracket Mount, with adhesive tape, over the console frame edge at pos.2.







Toyota Avensis for UK






Our Price: 22.30 (18.99 ex Vat.)

Item Number: 630525

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Adjustable console mount with tilt swivel.

A Proclip Car Bracket Mount with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of Toyota Avensis. In most Toyota Avensis it is placed on the left side of the console. The Proclip Car Bracket Mount has been tested to fit perfectly in the listed car models. (If you are installing the Proclip Car Bracket Mount in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Avensis Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the upper part of the Proclip Car Bracket Mount, with adhesive tape, over the edge of the console into the gap at pos. 1. Hook the long lower part of the Proclip Car Bracket Mount, with angle, under the edge of the console at position 2.




Enlarge image

3. Press the upper and the lower part of the Proclip Car Bracket Mount towards each other until the face of the Proclip Car Bracket Mount has a flat/horizontal position. Tighten the nut with the enclosed tool. Place the enclosed cap over the nut.



Enlarge image

4. The Proclip Car Bracket Mount is in place.



In most Toyota Avensis the adjustable Proclip Car Bracket Mount is placed on the left side of the console. Howerever, in some Toyota Avensis it is placed on the right side of the console and in a few cases there are different solutions e.i. mounting in the cup Car Cradle Mount. When you choose the location for the Proclip Car Bracket Mount it is important to make sure that the location spot will give the Proclip Car Bracket Mount the necessary hold/grip onto the console and that it will not block the airbag.





Alfa Romeo Spider-GTV for All Countries

Audi A3 for Australia
Audi A3 for UK
Audi A4 Avant for All Countries
Audi A6 for All Countries
Audi S3 for Australia
Audi S3 for UK
Audi S4 Avant for All Countries
Audi S4 Sedan for All Countries
Audi S6 for All Countries

BMW 316-330-M3 E46 for All Countries
BMW 518-540-M5 E34 for All Countries
BMW 520-545-M5 E60- E61 for All Countries
BMW 728-750 E38 for All Countries
BMW Compact for UK
BMW Z3 for All Countries

Chevrolet Epica for UK
Chevrolet Lacetti 4 door-SX-CDX for UK
Chevrolet Lacetti Hatchback-Stationwagon for Australia
Chevrolet Rezzo for UK
Chevrolet Tacuma for All Countries

Chrysler 300c for All Countries

Citroen Berlingo 2 for All Countries
Citroen C5 for All Countries
Citroen Xantia for UK
Citroen Xantia II for UK
Citroen Xsara for All Countries

Daewoo Lacetti for All Countries
Daewoo Nubira for All Countries
Daewoo Rezzo for UK
Daewoo Tacuma for All Countries

Fiat Stilo for UK

Ford Escape for UK
Ford Falcon for Australia

Holden Epica for Australia
Holden Frontera for Australia
Holden Rodeo for Australia
Holden Statesman for Australia

Honda Accord for UK
Honda Civic 3&4 Door for All Countries
Honda Civic 5 Door for UK
Honda CR-V for UK
Honda HR-V for All Countries
Honda Logo for UK

Hyundai Accent for All Countries
Hyundai Elantra for UK
Hyundai Sonata for All Countries
Hyundai Terracan for All Countries

Isuzu Trooper for UK

Jaguar S-Type for All Countries

Jeep Grand Cherokee for All Countries

Kia Carens for UK
Kia Credos for UK
Kia Mentor for Australia
Kia Sephia for UK
Kia Sephia II for UK
Kia Shuma for UK
Kia Shuma II for UK
Kia Sorento for All Countries

Land Rover Freelander for All Countries

Mazda 323 for UK
Mazda 323 F (BJ) for All Countries
Mazda 626 for All Countries
Mazda Demio for UK
Mazda Metro for Australia

Mercedes Benz C-Class (180-320) for All Countries

Mercury Cougar for UK

MG ZS for UK

Mitsubishi Lancer for All Countries
Mitsubishi Magna for Australia
Mitsubishi Montero Sport for UK
Mitsubishi Pajero Sport for UK
Mitsubishi Shogun Sport for UK
Mitsubishi Sigma for UK

Nissan Almera for UK
Nissan Almera Tino for UK
Nissan Kubistar for UK
Nissan Maxima for UK
Nissan Pathfinder for All Countries
Nissan Primera for UK
Nissan X-Trail for All Countries

Opel Combo for UK
Opel Corsa for UK
Opel Frontera for UK

Peugeot 206 for All Countries
Peugeot 306 for UK
Peugeot 406 for All Countries
Peugeot 605 for UK

Renault Kangoo for All Countries
Renault Laguna for All Countries
Renault Megane for UK
Renault Scenic for UK

Seat Cordoba for UK
Seat Ibiza for UK
Seat Inca for UK

Skoda Fabia for UK
Skoda Octavia Ambiente for UK
Skoda Octavia I for UK
Skoda Octavia RS for UK
Skoda Octavia Tour for UK
Skoda Pickup for UK
Skoda Superb for UK

Subaru Forester for All Countries
Subaru G3X Justy for All Countries
Subaru Impreza for All Countries
Subaru Legacy for All Countries
Subaru Legacy for UK
Subaru Liberty for Australia
Subaru Outback for Australia

Suzuki Baleno for Europe
Suzuki Grand Vitara for All Countries
Suzuki Grand Vitara for UK
Suzuki Ignis for Europe
Suzuki Reno for All Countries
Suzuki XL-7 for UK

Toyota Avensis for All Countries
Toyota Avensis Verso for All Countries
Toyota Camry for All Countries
Toyota Camry Solara for UK
Toyota Carina for UK
Toyota Corolla Verso for UK
Toyota LandCruiser for UK
Toyota Prado for Australia
Toyota SportsVan for UK

Vauxhall Combo for UK
Vauxhall Corsa for UK

Volkswagen Passat for All Countries
Volkswagen Sharan for UK
Volkswagen Touran for All Countries
Volkswagen Touran for UK

Volvo 850 for All Countries
Volvo C70 for UK
Volvo S70 for All Countries
Volvo V40 for All Countries
Volvo XC90 for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.