Toyota

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653380

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Celica's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Celica. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Celica Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap below the gap opener.



Enlarge image

2. Press to the right on Part 1, towards steering wheel, so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Remove the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screw. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Celica for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853380

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Celica's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Celica. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Celica Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. Attaching part (the smallest part) Part 2. Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap below the gap opener.



Enlarge image

2. Press to the left on Part 1, towards steering wheel, so the angled edge hooks behind the frame surrounding the control panel and the adhesive tape attaches. Pull out the gap opener.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Remove the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screw. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Celica for Europe






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852818

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Celica's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Celica. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Celica Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount attaching part.



Enlarge image

1. Press the attaching part into the gap between the dashboard and the frame surrounding the control panel.



Enlarge image

2. Press on the attaching part, away from the steering wheel, so the adhesive tape attaches to the dashboard.




Enlarge image

3. Press e.i. a screwdriver through the predrilled holes in the Proclip Car Bracket Mount face plate. Peel off both adhesive tape covers on the face plate. Place the holes in the face plate over the holes in the attaching piece so they match. Screw the face plate onto the fixing piece by using the enclosed screws.



Enlarge image

4. The Proclip Car Bracket Mount in place.







Toyota Celica for All Countries






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852765

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Celica's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Celica. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Celica Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Remove the hatch over the fuses. Press the thin end of the enclosed gap opener into the gap at pos. 1 to widen the gap between the dashboard and the frame surrounding the control panel. Clean the surface at pos 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the left part of the Proclip Car Bracket Mount, with adhesive tape, into the gap below the gap opener at pos. 1. Pull out the gap opener.




Enlarge image

3. Press forward on the Proclip Car Bracket Mount so the right part, with angle, hooks over the edge of the opening at pos. 2. Put back the hatch over the fuses.







Toyota Celica for Europe






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 852059

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Celica's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Celica. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Celica Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. Open the glove compartment. Clean the surface on the console edge nest to the climate control panel with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

1. Press the curved edge on the left side of the Proclip Car Bracket Mount, with adhesive tape, into the gap between the center console panel frame and the console edge.



Enlarge image

2. Press forward on the right side of the Proclip Car Bracket Mount so the grooved edge snaps into the gap between the dashboard and the glove compartment frame.




Enlarge image

3 and 4. The Proclip Car Bracket Mount in place.







Toyota Celica for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.