Toyota

 
 

 
 
 


Brodit ProClip for Toyota Corolla Center Car Bracket Mount #653984

Toyota Ascent Australia / Toyota Auris UK / Toyota Auris Full Hybrid UK / Toyota Corolla Australia / Toyota Seca Australia

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653984

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Corolla's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Corolla Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enlcosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adheisve tape covers on the Proclip Car Bracket Mount. Place the angled edge on the upper part of the Proclip Car Bracket Mount onto the dashboard next to the center console. Press down on top of the Proclip Car Bracket Mount, in the same time pull it toward you so the angled upper edge hooks into the gap between the dashboard and the center console.



Enlarge image

2. Pull the lower part of the Proclip Car Bracket Mount toward you.




Enlarge image

3. Press the lower part of the Proclip Car Bracket Mount downward and hook the angled edge under the upper edge of the air vent.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Ascent for Australia
Toyota Auris for UK
Toyota Auris Full Hybrid for UK
Toyota Corolla for Australia
Toyota Seca for Australia






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653025

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Corolla's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Corolla Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the dashboard ledge and the air vent panel frame to widen the gap.



Enlarge image

2. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Press until you see or hear/feel it snap into place. Pull out the gap opener.




Enlarge image

3. Press the thin end of the enclosed gap opener into the gap between the panel frame surrounding the stereo and the padded dashboard to widen the gap. Press the grooved edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Note: Start by pressing forward on the upper left corner of the Proclip Car Bracket Mount, and then follow through by moving your pressure over to the right corner of the Proclip Car Bracket Mount. Press until you see or hear/feel it snap into place. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Corolla for Australia






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653020

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Corolla's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Corolla Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount. This Proclip Car Bracket Mount consists of two parts. Part 1. The attaching part (the smallest part) Part 2. The Proclip Car Bracket Mount face plate



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the control panel and the dashboard to widen the gap.



Enlarge image

2. Peel off the cover of the adhesive tape on Part 1. Press Part 1 into the gap between the gap openers. Press to the left on Part 1, away from the steering wheel, so the angled edge hooks under/behind the control panel and the adhesive attaches to the dashboard. Pull out the gap openers.




Enlarge image

3. Open up the predrilled holes in Part 2 with a screwdriver (Philips). Peel off the cover of the adhesive tape on Part 2. Place Part 2 onto Part 1 so the holes match. Screw Part 2 onto Part 1 with the enclosed screws. NOTE! Screw the screws straight into Part 1, in the same angle as Part 1. The Proclip Car Bracket Mount is in place.







Toyota Corolla for UK






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 603803

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Corolla's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Corolla Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the picures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the grooved edge on the upper part of the Proclip Car Bracket Mount into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.




Enlarge image

3. Press the gap opener into the gap between the upper and lower parts of the dashboard. Press the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Corolla for UK






Brodit ProClip for Toyota Corolla Center Car Bracket Mount #854955

Toyota Corolla All Countries / Toyota Corolla USA

Our Price: 15.50 (13.20 ex Vat.)

Item Number: 854955

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Corolla's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Corolla. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Corolla Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the center console panel frame and the air vent ledge panel frame, to widen the gap.



Enlarge image

2. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape cover on the Proclip Car Bracket Mount. Press the thin edge with adhesive tape into the gap next to the gap opener. Pull out the gap opener.




Enlarge image

3. Press the thin end of the gap opener into the gap between the air vent ledge panel frame and padded part of the upper dashboard. Press/lift the Proclip Car Bracket Mount forward so the upper angled edge goes into the gap next to the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota Corolla for All Countries
Toyota Corolla for USA






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.