Toyota

 
 

 
 
 


Brodit ProClip for Toyota GT86 Angled Car Bracket Mount High #654812

Subaru BRZ All Countries / Toyota GT86 All Countries / Toyota GT86 Europe

Our Price: 16.21 (13.80 ex Vat.)

Item Number: 654812

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota GT86's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota GT86. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota GT86 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the upper section of the dashboard and the frame surronding the control panel.



Enlarge image

2. Pull the upper part of the Proclip Car Bracket Mount upward and hook the angled edge into the gap between the air vent and the surrounding frame inside the lower part of the arivent.




Enlarge image

3. Press downward on top of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Subaru BRZ for All Countries

Toyota GT86 for All Countries
Toyota GT86 for Europe






Brodit ProClip for Toyota GT86 Angled Car Bracket Mount High #854812

Scion FR-S USA / Subaru BRZ All Countries / Toyota GT86 Europe

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 854812

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket for the Toyota GT86's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota GT86. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota GT86 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the upper section of the dashboard and the frame surronding the control panel.



Enlarge image

2. Pull the upper part of the Proclip Car Bracket Mount upward and hook the angled edge into the gap between the air vent and the surrounding frame inside the lower part of the arivent.




Enlarge image

3. Press downward on top of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Scion FR-S for USA

Subaru BRZ for All Countries

Toyota GT86 for Europe






Brodit ProClip for Toyota GT86 Angled Car Bracket Mount High #654812

Subaru BRZ All Countries / Toyota GT86 All Countries / Toyota GT86 Europe

Our Price: 16.21 (13.80 ex Vat.)

Item Number: 654812

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota GT86's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota GT86. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota GT86 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the angled edge on the lower part of the Proclip Car Bracket Mount into the gap between the upper section of the dashboard and the frame surronding the control panel.



Enlarge image

2. Pull the upper part of the Proclip Car Bracket Mount upward and hook the angled edge into the gap between the air vent and the surrounding frame inside the lower part of the arivent.




Enlarge image

3. Press downward on top of the Proclip Car Bracket Mount so the angled edge goes all the way into the gap.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Subaru BRZ for All Countries

Toyota GT86 for All Countries
Toyota GT86 for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.