Toyota

 
 

 
 
 


Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653162

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 7

The Proclip Car Bracket Mount is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota LandCruiser 100 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the air vent and the control panel to widen the gap. Place the gap openers approx. 10 cm apart. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the short right part of the Proclip Car Bracket Mount into the gap between the gap openers. Pull out the gap openers.




Enlarge image

3. Press a gap opener into the gap between the dashboard and the panel surrounding the air vent. Hook the long left part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota LandCruiser 100 for Australia






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 653161

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota LandCruiser 100 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the stereo and the frame surrounding the air vent to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the left part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.




Enlarge image

3. Press the gap opener into the gap between the dashboard and the frame surrounding the instrument panel. Press the grooved edge on the right part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota LandCruiser 100 for Australia






Brodit ProClip for Toyota LandCruiser 100 Angled Car Bracket Mount #853162

Toyota LandCruiser USA / Toyota LandCruiser 100 Europe / Toyota LandCruiser 100 USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 853162

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota LandCruiser 100 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the air vent and the control panel to widen the gap. Place the gap openers approx. 10 cm apart. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the short left part of the Proclip Car Bracket Mount into the gap between the gap openers. Pull out the gap openers.




Enlarge image

3. Press a gap opener into the gap between the dashboard and the panel surrounding the air vent. Hook the long right part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota LandCruiser for USA
Toyota LandCruiser 100 for Europe
Toyota LandCruiser 100 for USA






Brodit ProClip for Toyota LandCruiser 100 Angled Car Bracket Mount #853162

Toyota LandCruiser USA / Toyota LandCruiser 100 Europe / Toyota LandCruiser 100 USA

Our Price: 15.51 (13.21 ex Vat.)

Item Number: 853162

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota LandCruiser 100 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin ends of the enclosed gap openers into the gap between the frame surrounding the air vent and the control panel to widen the gap. Place the gap openers approx. 10 cm apart. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the short left part of the Proclip Car Bracket Mount into the gap between the gap openers. Pull out the gap openers.




Enlarge image

3. Press a gap opener into the gap between the dashboard and the panel surrounding the air vent. Hook the long right part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota LandCruiser for USA
Toyota LandCruiser 100 for Europe
Toyota LandCruiser 100 for USA






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 853161

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota LandCruiser 100's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota LandCruiser 100. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota LandCruiser 100 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the stereo and the frame surrounding the air vent to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the right part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.




Enlarge image

3. Press the gap opener into the gap between the dashboard and the frame surrounding the instrument panel. Press the grooved edge on the left part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota LandCruiser 100 for Europe






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.