Toyota

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852819

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota MR2 Spyder's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota MR2 Spyder. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota MR2 Spyder Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instrcutions before attaching the Proclip Car Bracket Mount Part 1: The attaching part (the smallest part) Part 2: The Proclip Car Bracket Mount faceplate



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the climate control panel frame and the padded dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1.



Enlarge image

2. Press the angled thin end of Part 1 into the gap between the gap




Enlarge image

3. Press Part 1 all the way in until the adhesive attaches. Pull out the gap openers.



Enlarge image

4. Press a Phillips screwdriver firmly through the large holes in Part 2 to



open them up. Peel off the cover of the adhesive tape. Place Part 2 onto Part 1 so the holes match and the adhesive tape is on the left. Screw the enclosed screws into the holes. Proclip Car Bracket Mount in place.





Toyota MR2 Spyder for All Countries






Our Price: 23.74 (20.22 ex Vat.)

Item Number: 830535

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Adjustable console mount with tilt swivel.

A Proclip Car Bracket Mount with a face plate that tilts and swivels and that is adjustable to suit the height of the console in a number of Toyota MR2 Spyder. In most Toyota MR2 Spyder it is placed on the right side of the console. The Proclip Car Bracket Mount has been tested to fit perfectly in the listed car models. (If you are installing the Proclip Car Bracket Mount in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota MR2 Spyder Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the upper part of the Proclip Car Bracket Mount, with adhesive tape, over the edge of the console into the gap at pos. 1. Hook the long lower part of the Proclip Car Bracket Mount, with angle, under the edge of the console at position 2.




Enlarge image

3. Press the upper and the lower part of the Proclip Car Bracket Mount towards each other until the face of the Proclip Car Bracket Mount has a flat/horizontal position. Tighten the nut with the enclosed tool. Place the enclosed cap over the nut.



Enlarge image

4. The Proclip Car Bracket Mount is in place.



In most Toyota MR2 Spyder the adjustable Proclip Car Bracket Mount is placed on the right side of the console. Howerever, in some Toyota MR2 Spyder it is placed on the left side of the console and in a few cases there are different solutions e.i. mounting in the cup Car Cradle Mount. When you choose the location for the Proclip Car Bracket Mount it is important to make sure that the location spot will give the Proclip Car Bracket Mount the necessary hold/grip onto the console and that it will not block the airbag.





Acura CL for USA
Acura MDX for USA
Acura RSX for USA
Acura TL for USA

Alfa Romeo 147 for Europe
Alfa Romeo 166 for Europe

Audi A4 Avant for All Countries
Audi A4 Sedan for Europe
Audi A8 for All Countries
Audi S4 Avant for All Countries
Audi S4 Sedan for Europe
Audi S8 for All Countries

BMW Z4 for Europe

Chevrolet Impala for All Countries
Chevrolet Malibu for All Countries
Chevrolet Monte Carlo for All Countries

Chrysler Concord for USA

Daewoo Nubira for Europe

Ford Fusion for USA
Ford Mondeo for Europe

Honda Accord for Europe
Honda Accord for USA
Honda CR-V for Europe

Hyundai Coupe for Europe
Hyundai i30 for Europe
Hyundai Santa Fe for Europe
Hyundai Santa Fe for USA
Hyundai Sonata for All Countries

Isuzu Axiom for USA

Jeep Grand Cherokee for All Countries

Kia Carstar for Europe
Kia Joice for Europe
Kia Magentis for Europe
Kia Optima for USA

Lexus ES 300 for All Countries
Lexus ES Series for All Countries

Lincoln Continental for USA

Mazda 6 for Europe
Mazda 6 for USA

Mercedes Benz G-Class for Europe
Mercedes Benz Gelandewagen for Europe

Mercury Milan for USA

Mitsubishi Eclipse for USA
Mitsubishi Galant for USA
Mitsubishi Lancer for USA
Mitsubishi Outlander for All Countries
Mitsubishi Space Star for Europe
Mitsubishi Space Van for Europe

Nissan Almera for Europe
Nissan Primera for Europe
Nissan Sentra for USA

Pontiac Bonneville for All Countries

Renault Laguna for Europe

Seat Leon for Europe
Seat Toledo for Europe

Toyota 4Runner for All Countries
Toyota Avalon for All Countries
Toyota Corolla for Europe
Toyota Corolla for USA
Toyota MR2 Spyder for All Countries

Volkswagen Golf for USA
Volkswagen Golf IV for Europe
Volkswagen Golf IV Variant for Europe
Volkswagen Phaeton for Europe
Volkswagen Polo for Europe
Volkswagen Touareg for Europe
Volkswagen Touareg for USA






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 830530

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Adjustable console mount.

A Proclip Car Bracket Mount that is adjustable to suit the height of the console in a number of Toyota MR2 Spyder. In most Toyota MR2 Spyder it is placed on the right side of the console. The Proclip Car Bracket Mount has been tested to fit perfectly in the listed car models. (If you are installing the Proclip Car Bracket Mount in an unlisted car model, it is important not to block the air bag.) Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota MR2 Spyder Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Clean the surface at pos. 1 with the enclosed alcohol pad. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Hook the upper part of the Proclip Car Bracket Mount, with adhesive tape, over the edge of the console into the gap at pos. 1. Hook the long lower part of the Proclip Car Bracket Mount, with angle, under the edge of the console at position 2.




Enlarge image

3. Press the upper and the lower part of the Proclip Car Bracket Mount towards each other until the face of the Proclip Car Bracket Mount has a flat/horizontal position. Tighten the nut with the enclosed tool. Place the enclosed cap over the nut.



Enlarge image

4. Place the Proclip Car Bracket Mount face plate over the Proclip Car Bracket Mount so the holes match. Note that the position of the face plate changes depending on which way you hold the face plate. Screw the face plate onto the Proclip Car Bracket Mount by using the enclosed screws. The Proclip Car Bracket Mount is in place.



In most Toyota MR2 Spyder the adjustable Proclip Car Bracket Mount is placed on the right side of the console. Howerever, in some Toyota MR2 Spyder it is placed on the left side of the console and in a few cases there are different solutions e.i. mounting in the cup Car Cradle Mount. When you choose the location for the Proclip Car Bracket Mount it is important to make sure that the location spot will give the Proclip Car Bracket Mount the necessary hold/grip onto the console and that it will not block the airbag.





Acura CL for USA
Acura MDX for USA
Acura RSX for USA
Acura TL for USA

Alfa Romeo 147 for Europe
Alfa Romeo 166 for Europe

Audi A4 Avant for All Countries
Audi A4 Sedan for Europe
Audi A8 for All Countries
Audi S4 Avant for All Countries
Audi S4 Sedan for Europe
Audi S8 for All Countries

BMW Z4 for Europe

Chevrolet Impala for All Countries
Chevrolet Malibu for All Countries
Chevrolet Monte Carlo for All Countries

Chrysler Concord for USA

Daewoo Nubira for Europe

Ford Fusion for USA
Ford Mondeo for Europe

Honda Accord for Europe
Honda Accord for USA
Honda CR-V for Europe

Hyundai Coupe for Europe
Hyundai i30 for Europe
Hyundai Santa Fe for Europe
Hyundai Santa Fe for USA
Hyundai Sonata for All Countries

Isuzu Axiom for USA

Jeep Grand Cherokee for All Countries

Kia Carstar for Europe
Kia Joice for Europe
Kia Magentis for Europe
Kia Optima for USA

Lexus ES 300 for All Countries
Lexus ES Series for All Countries

Lincoln Continental for USA

Mazda 6 for Europe
Mazda 6 for USA

Mercedes Benz G-Class for Europe
Mercedes Benz Gelandewagen for Europe

Mercury Milan for USA

Mitsubishi Eclipse for USA
Mitsubishi Galant for USA
Mitsubishi Lancer for USA
Mitsubishi Outlander for All Countries
Mitsubishi Space Star for Europe
Mitsubishi Space Van for Europe

Nissan Almera for Europe
Nissan Primera for Europe
Nissan Sentra for USA

Pontiac Bonneville for All Countries

Renault Laguna for Europe

Seat Leon for Europe
Seat Toledo for Europe

Toyota 4Runner for All Countries
Toyota Avalon for All Countries
Toyota Corolla for Europe
Toyota Corolla for USA
Toyota MR2 Spyder for All Countries
Toyota Sequoia for USA

Volkswagen Golf for USA
Volkswagen Golf IV for Europe
Volkswagen Golf IV Variant for Europe
Volkswagen Phaeton for Europe
Volkswagen Polo for Europe
Volkswagen Touareg for Europe
Volkswagen Touareg for USA






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652819

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota MR2 Spyder's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota MR2 Spyder. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota MR2 Spyder Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instrcutions before attaching the Proclip Car Bracket Mount Part 1: The attaching part (the smallest part) Part 2: The Proclip Car Bracket Mount faceplate



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the climate control panel frame and the padded dashboard to widen the gap. Peel off the cover of the adhesive tape on Part 1.



Enlarge image

2. Press the angled thin end of Part 1 into the gap between the gap




Enlarge image

3. Press Part 1 all the way in until the adhesive attaches. Pull out the gap openers.



Enlarge image

4. Press a Phillips screwdriver firmly through the large holes in Part 2 to



open them up. Peel off the cover of the adhesive tape. Place Part 2 onto Part 1 so the holes match and the adhesive tape is on the right. Screw the enclosed screws into the holes. Proclip Car Bracket Mount in place.





Toyota MR2 Spyder for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.