Toyota

 
 

 
 
 


Brodit ProClip for Toyota Picnic Center Car Bracket Mount #852471

Toyota Picnic Europe / Toyota SportsVan Europe

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852471

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Picnic's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Picnic. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Picnic Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the panel frame and the padded dashboard at pos. 1. to widen the gap. Clean the surface at pos 2 with the enclosed alcohol pad.



Enlarge image

2. Press the Proclip Car Bracket Mount mount part into the gap below the gap opener. Bend to the left until it is attached under the panel as shown in the picture. Slide the mount part downwards into pos. 3.




Enlarge image

3. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount face plate. Place the face plate over the mount part. Screw on the two enclosed screws.







Toyota Picnic for Europe
Toyota SportsVan for Europe






Brodit ProClip for Toyota Picnic Angled Car Bracket Mount #852440

Toyota Picnic Europe / Toyota SportsVan Europe

Our Price: 15.20 (12.94 ex Vat.)

Item Number: 852440

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Picnic's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Picnic. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Picnic Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.



Enlarge image

1. Press the thin curved part jnto gap between the panel frame and the padded dashboard at pos. 1 (see detail), press until it has reached the bottom of the gap. Bend to the right until it is attached under the panel.



Enlarge image

2. Remove protection film from the flat plastic piece and press left angled part of the piece into gap between the panel frame and the airvent control at pos. 2.




Enlarge image

3. Screw the plastic piece onto the supporting cuved part, the plastic piece should attach onto the adhesive tape.







Toyota Picnic for Europe
Toyota SportsVan for Europe






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 652471

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 3

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Picnic's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Picnic. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Picnic Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Read all instructions before attaching the Proclip Car Bracket Mount



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the panel frame and the padded dashboard at pos. 1. to widen the gap. Clean the surface at pos 2 with the enclosed alcohol pad.



Enlarge image

2. Press the Proclip Car Bracket Mount mount part into the gap below the gap opener. Bend to the left until it is attached under the panel as shown in the picture. Slide the mount part downwards into pos. 3.




Enlarge image

3. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount face plate. Place the face plate over the mount part. Screw on the two enclosed screws.







Toyota Picnic for UK






Our Price: 15.51 (13.21 ex Vat.)

Item Number: 652440

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota Picnic's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota Picnic. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota Picnic Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.



Enlarge image

1. Press the thin curved part jnto gap between the panel frame and the padded dashboard at pos. 1 (see detail), press until it has reached the bottom of the gap. Bend to the right until it is attached under the panel.



Enlarge image

2. Remove protection film from the flat plastic piece and press right angled part of the piece into gap between the panel frame and the airvent control at pos. 2.




Enlarge image

3. Screw the plastic piece onto the supporting cuved part, the plastic piece should attach onto the adhesive tape.







Toyota Picnic for UK






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.