Toyota

 
 

 
 
 


Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653973

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota ProAce's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota ProAce. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota ProAce Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Open the glove compartment. Remove the screw in the upper right corner. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard, to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Press the curved edge on the right part of the Proclip Car Bracket Mount into the gap below the gap opener. Flip the Proclip Car Bracket Mount forward/leftward so the curved right edge hooks behind the frame surrounding the control panel




Enlarge image

3. Adjust the left part of the Proclip Car Bracket Mount so the hole matches the hole in the dashboard. Screw the Proclip Car Bracket Mount into place with the enclosed screw. Pull out the gap opener. Close the glove compartment.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Dispatch for UK
Citroen Jumpy 2nd Gen for UK
Citroen Jumpy III for UK

Fiat Scudo for UK

Peugeot Expert for All Countries

Toyota ProAce for All Countries






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 653972

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 7

The Proclip Car Bracket Mount is a mounting bracket for the Toyota ProAce's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota ProAce. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota ProAce Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. It is very important to place the Proclip Car Bracket Mount in the exact same position as shown in the pictures.



Enlarge image

1. Press the thin end of the enclosed gap openers into the gap between the frame surrounding the air vent and the coin compartment, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the upper part of the Proclip Car Bracket Mount into the gap between the gap openers.




Enlarge image

3. Pull the Proclip Car Bracket Mount downward and press the lower part foward so the angled edge hooks into the gap between the frame surrounding the stereo and the frame surrounding the air vent. Pull out the gap openers.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Dispatch for UK
Citroen Jumpy 2nd Gen for UK
Citroen Jumpy III for UK

Fiat Scudo for UK

Peugeot Expert for All Countries

Toyota ProAce for All Countries






Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 603974

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

Will block cup Car Cradle Mount.

The Proclip Car Bracket Mount is a mounting bracket for the Toyota ProAce's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota ProAce. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota ProAce Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. It is important to place the Proclip Car Bracket Mount in the exact same position as shown in the pictures.



Enlarge image

1. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap between the frame surrounding the air vent and the dashboard. Press until you hear/feel it snaps into place.



Enlarge image

2. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the dashboard, to widen the gap. Press forward on the upper part of the Proclip Car Bracket Mount so the grooved edge goes into the gap next to the gap opener. Press until you hear/feel it snaps into place. If the gap is very tight, carefully use the gap opener to bend it a bit wider. Pull out the gap opener.




Enlarge image

3. Press forward on the Proclip Car Bracket Mount so it is properly in place.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Citroen Dispatch for UK
Citroen Jumpy 2nd Gen for UK
Citroen Jumpy III for UK

Fiat Scudo for UK

Peugeot Expert for All Countries

Toyota ProAce for All Countries






Brodit ProClip for Toyota ProAce Center Car Bracket Mount #855244

Citroen Jumpy 3rd Gen Europe / Citroen SpaceTourer Europe / Peugeot Expert Europe / Peugeot Traveller Europe / Toyota ProAce Europe

Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 855244

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Brodit Brand New Item - PreOrder Yours NOW !

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Toyota ProAce's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Toyota ProAce to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota ProAce Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before installing the Proclip Car Bracket Mount. This Proclip Car Bracket Mount can also be placed on the right side of the dashboard.  



Enlarge image

1. Insert the thin end of the enclosed gap opener into the gap between the dashboard overhang and the frame surrounding the center control panel, to widen the gap. Use the enclosed alcohol pad to clean the area where the PoClip is to be installed. Remove the adhesive tape cover on the Proclip Car Bracket Mount. Insert the angled upper edge of the Proclip Car Bracket Mount into the gap between the frame surrounding the storage compartment and the upper part of the dashboard.



Enlarge image

2. Flex the Proclip Car Bracket Mount downward/toward you so the angled upper edge hooks into place underneath the dashboard.




Enlarge image

3. Pull the Proclip Car Bracket Mount toward you, flexing it, so the angled lower edge goes into the gap next to the gap opener. Remove the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.



 





Citroen Jumpy 3rd Gen for Europe
Citroen SpaceTourer for Europe

Peugeot Expert for Europe
Peugeot Traveller for Europe

Toyota ProAce for Europe






Brodit ProClip for Toyota ProAce Center Car Bracket Mount #655244

Citroen Jumpy 3rd Gen All Countries / Citroen SpaceTourer All Countries / Peugeot Expert All Countries / Peugeot Traveller All Countries / Toyota ProAce All Countries

Our Price: £15.20 (£12.94 ex Vat.)

Item Number: 655244

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket that you attach onto the Toyota ProAce's dashboard. It provides a perfect mounting platform for mobile phones, or other devices that you want to have within easy reach in the car. Safe, neat and convenient!
 
The Proclip Car Bracket Mount has a perfect fit, it is custom made for each Toyota ProAce to ensure a secure base for installations. And the Proclip Car Bracket Mount is easy to install. The bracket simply snaps into place in gaps in the dashboard, you do not need to drill holes, not use special tools or not dismantle the dashboard. Made in black ABS plastic. Comes with detailed instructions.
 
View demo video 


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota ProAce Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before installing the Proclip Car Bracket Mount. This Proclip Car Bracket Mount can also be placed on the left side of the dashboard.  



Enlarge image

1. Insert the thin end of the enclosed gap opener into the gap between the dashboard overhang and the frame surrounding the center control panel, to widen the gap. Use the enclosed alcohol pad to clean the area where the PoClip is to be installed. Remove the adhesive tape cover on the Proclip Car Bracket Mount. Insert the angled upper edge of the Proclip Car Bracket Mount into the gap between the frame surrounding the storage compartment and the upper part of the dashboard.



Enlarge image

2. Flex the Proclip Car Bracket Mount downward/toward you so the angled upper edge hooks into place underneath the dashboard.




Enlarge image

3. Pull the Proclip Car Bracket Mount toward you, flexing it, so the angled lower edge goes into the gap next to the gap opener. Remove the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.



 





Citroen Jumpy 3rd Gen for All Countries
Citroen SpaceTourer for All Countries

Peugeot Expert for All Countries
Peugeot Traveller for All Countries

Toyota ProAce for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.