Toyota

 
 

 
 
 


Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653754

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 1

The Proclip Car Bracket Mount is a mounting bracket for the Toyota RAV 4's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota RAV 4. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota RAV 4 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the dashboard and the center console sidewall, to widen the gap. Use the enclosed alcohol pad to clean the area where the Proclip Car Bracket Mount is to be installed. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the curved edge on the left part of the Proclip Car Bracket Mount into the gap above the gap opener. Press firmly so the edge goes into the gap.



Enlarge image

2. Flip the Proclip Car Bracket Mount rightwards so the left curved edge hooks behind the dashboard.




Enlarge image

3. Hook the angled edge on the right part of the Proclip Car Bracket Mount into the gap in the center console frame. Press the part edge towards the center console frame so the angled edge goes all the way into the gap and the adhesive tape attaches. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota RAV 4 for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653753

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: 2

The Proclip Car Bracket Mount is a mounting bracket for the Toyota RAV 4's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota RAV 4. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota RAV 4 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount. It is important to place the Proclip Car Bracket Mount in the exact same position as shown in the pictures.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the control panel, to widen the gap. Peel off the cover of the adhesive tape on the Proclip Car Bracket Mount.



Enlarge image

2. Place the upper edge of the Proclip Car Bracket Mount into the upper part of the air vent and press upwards so the adhesive tape attaches.




Enlarge image

3. Press the grooved edge on the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Press until you hear/feel it snaps into place. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota RAV 4 for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653378

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota RAV 4's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota RAV 4. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota RAV 4 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Place the gap opener by the lower left corner of the control panel. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard to widen the gap. Slide the gap opener 5-8 cm upwards in the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the left part of the Proclip Car Bracket Mount into the gap above the gap opener. Pull out the gap opener.




Enlarge image

3. Hook the angled edge on the right part of the Proclip Car Bracket Mount into the gap between the stereo/navigation system and the surrounding frame.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota RAV 4 for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653377

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota RAV 4's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota RAV 4. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota RAV 4 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the control panel and the dashboard to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount.



Enlarge image

2. Press the angled edge on the left part of the Proclip Car Bracket Mount into the gap between the stereo/navigation system and the surrounding frame.




Enlarge image

3. Press forwards on the right side of the Proclip Car Bracket Mount so the angled edge on the right part of the Proclip Car Bracket Mount hooks into the gap below the gap opener. Pull out the gap opener.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota RAV 4 for All Countries






Our Price: 15.20 (12.94 ex Vat.)

Item Number: 653293

Discounts available for orders of 10 units or more - call +44 1759 371275

Stock: Stock on Order - delivery approx. 7-10 days

The Proclip Car Bracket Mount is a mounting bracket for the Toyota RAV 4's dashboard. Onto the Proclip Car Bracket Mount you can install e.g. a Car Cradle Mount for your mobile phone or PDA or a handsfree set etc. Safe and convenient -always within easy reach. The Proclip Car Bracket Mount is car specific and easy to install. The installation is quick, no special tools or dismantle of the dashboard is required and it will not damage the interior of the Toyota RAV 4. Made in black ABS plastic. Comes with detailed instructions.


If you order this product before 4:30pm today, and it is in Stock customers can expect shipment today. If you wish to pre-order or have stock allocated for immediate despatch upon restock please call us or place an order on the website.


These are detailed fitting Instructions for the Brodit Mount for your Toyota RAV 4 Vehicles. This is how you fit your Proclip Car Bracket Mount mount onto your Proclip Car Bracket Mount. Full Instructions also come with your mount.

Attention! Please read all of the instructions and look at the pictures before attaching the Proclip Car Bracket Mount.



Enlarge image

1. Loosen the two screws in the frame surrounding the control panel, on each side of the air vents.



Enlarge image

2. Press the thin end of the enclosed gap opener into the gap between the frame surrounding the air vent and the stereo, to widen the gap. Peel off the adhesive tape covers on the Proclip Car Bracket Mount. Press the lower part of the Proclip Car Bracket Mount into the gap next to the gap opener. Pull out the gap opener.




Enlarge image

3. Press forwards on the upper part of the Proclip Car Bracket Mount so the angled edge hooks into the gap between the frame surrounding the control panel and the dashboard. Press the gap opener into the gap next to the Proclip Car Bracket Mount and prize carfully so the gap is widened. Press downwards on top of the Proclip Car Bracket Mount so it goes all the way into the gap. Pull out the gap opener. Retighten the screws.



Enlarge image

4. The Proclip Car Bracket Mount is in place.







Toyota RAV 4 for All Countries






 

 



Thank you for adding your Brodit Car Bracket Mount. The Brodit Solution involves Two Steps. If you require a Brodit Car Cradle Mount then please select from the menus below. If you already have a Brodit Car Cradle Mount please proceed to checkout.